How to Build a Side Pool Deck

Step 3: Cutting the 4"x4" posts.

Place a full length 4"x4" post in the post pocket of one of the Dek-Block® piers closest to the pool and hold plumb (vertically level).

Using a level and the pool's metal coping as a guide, mark a line level with the top of the pool's coping. From this line, subtract the following 4 items.

Next, cut the 4"x4" post to length and repeat this step for the second corner block near the pool.

By using the pool's coping as a guide, it will ensure that the deck is aligned with the pool. (If deck was to be built perfectly level and the pool was not level, the deck would appear unlevel)

Once the two 4"x4" posts nearest the pool are cut, place a 2"x6" support board on top of one of the 4"x4" posts. Extend the 2"x6" support board over the Dek-Block® pier that is furthest from the pool. Using a level as a guide, measure from the bottom of the 2"x6" support board to the bottom of the post pocket of the Dek-Block® pier. Cut the 4"x4" post to length and repeat on the opposite side.

Printable Step by Step Instructions

The printable version of our instructions are in Adobe PDF format.

You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12