NEW

How to Build a Side Pool Deck

Step 10: Attach blocking boards.

Blocking should be located 1-2 inches out from the edge of the pool's coping. Start by cutting a 2"x6" blocking board slightly longer than the distance between support boards. Set the 2"x6" blocking board on top of the 2"x6" support boards alligned with the pool's coping. With a pencil, mark the angle on each end. Finish by cutting and securing all the 2x6" support boards with 2-1/2" deck screws.

Printable Step by Step Instructions

The printable version of our instructions are in Adobe PDF format.

You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12

© 2008 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.